Job description
Abstract
Electric vehicle batteries retain recoverable value beyond their first life.
Keywords: Smart Disassembly / End-of-Life Management / EV Batteries / State of Health / Explainable AI
The way Electric Vehicles (EVs) are used throughout their lifetime can strongly influence their overall effectiveness and the end-of-life (EOL) management process. At present, EV battery dismantling is predominantly carried out manually, because of the wide range of operations required and the significant variability in battery states influences designs, technologies and history. This results in higher costs for repairing, recycling, reusing, or refurbishing the batteries. Several projects (such as the RHINOCEROS EU Project and the RESTORE EU Project and Battl-EU ANR project) have made progress in enabling robots to dismantle batteries automatically and the estimation of their current state, aiming to cut these additional dismantling costs and processing times. However, for now, batteries are depopulated without considering the actual state of individual modules or cells and are subsequently directed to shredding processes to recover Critical Raw Materials from the resulting black mass. This thesis aims to develop a smart disassembly process by integrating a-priori knowledge derived from vehicle usage patterns and owner profiles (battery passport) in addition to the estimation of the current state of each component and module, which aims to improve the profitability of EOL batteries. Using an explainable AI model and operations research techniques, we will assess the state of health of EV batteries and decide whether to apply destructive or non-destructive methods adapted to optimal EOL management strategy. By learning from lifecycle data, we aim to design more efficient routing strategies for reuse, repurposing, or recycling.
Scientific context
The rapid adoption of electric vehicles is increasing the volume of lithium-ion batteries approaching end of life. Variability in geometry, chemistry and degradation history makes dismantling labour-intensive and costly, with safety implications. Current recycling strategies frequently favour shredding and recovery of critical raw materials, overlooking residual value at module or cell level.
Intelligent disassembly therefore requires links between lifecycle information (including battery passports), diagnostic measurements and industrial decisions. Joint analysis of technical feasibility, economics and environmental impacts can enable more selective reuse, remanufacturing, second-life or recycling pathways.
Subject
The thesis will develop an intelligent, automated decision-support framework to determine the disassembly depth (pack, module or cell) and the preferred end-of-life pathway for individual EV batteries. It will integrate three complementary research components:
Multi-source knowledge integration: combine vehicle usage patterns and battery passport information with State-of-Health (SoH) estimates of modules and components to assess residual performance and value.
Operations Research and dynamic scheduling: formulate and solve multi-criteria decision and optimization problems covering disassembly choices, processing operations and routing to recycling, refurbishment, remanufacturing or second-life use.
Explainable AI for diagnosis: develop interpretable, data-driven models of health indicators and decision explanations, supporting traceability and industrial acceptance.
The methods will be assessed through industrial battery dismantling case studies and project data, examining recovery value, treatment costs, feasibility and sustainable operation.
Prior works in the laboratory
University of Agder (UiA) and CESI LINEACT contribute complementary expertise in robotic battery dismantling, simulation, AI, Operations Research and industrial decision support. UiA has developed experimental platforms and battery processing data through national and European projects such as RHINOCEROS, RESTORE and LIBRES.
CESI LINEACT contributes optimization and data-driven decision methods, battery manufacturing planning, energy management and battery models. Joint activities, student exchanges and publications already connect both teams, supporting shared validation and supervision.
Work program
The joint doctoral training will comply with both institutions’ requirements, including 30 ECTS of doctoral courses and 100 hours of doctoral training.
Year 1: applied statistics (ENE701, 5 ECTS), theory of science and ethics (EX-603, 5 ECTS), scientific writing (TFL601, 5 ECTS, recommended); literature review, research methodology and problem formalization.
Year 2: design, modelling and simulation of mechatronic systems (MAS601, 5 ECTS); data-driven diagnostics, XAI, routing optimization, international mobility and mid-term evaluation.
Year 3: remaining doctoral training; integrated model validation, scientific dissemination, thesis writing and defence preparation.
Expected scientific/technical production
Year 1: state-of-the-art review, problem formulation and one conference paper on SoH assessment and end-of-life decision-making.
Year 2: explainable diagnostic models, routing prototype, one journal paper and one conference paper.
Year 3: integrated optimization and validation framework, two journal papers and one conference paper. Expected overall output: approximately three journal papers and three conference papers, plus reusable decision-support methods for industrial recovery pathways.
Context
Lab presentation
CESI LINEACT (UR 7527), Laboratory for Digital Innovation for Businesses and Learning to Support the Competitiveness of Territories, anticipates and accompanies the technological mutations of sectors and services related to industry and construction. The historical proximity of CESI with companies is a determining element for our research activities. It has led us to focus our efforts on applied research close to companies and in partnership with them. A human-centered approach coupled with the use of technologies, as well as territorial networking and links with training, have enabled the construction of cross-cutting research; it puts humans, their needs and their uses, at the center of its issues and addresses the technological angle through these contributions.
Its research is organized according to two interdisciplinary scientific teams and several application areas.
Team 1 "Learning and Innovating" mainly concerns Cognitive Sciences, Social Sciences and Management Sciences, Training Techniques and those of Innovation. The main scientific objectives are the understanding of the effects of the environment, and more particularly of situations instrumented by technical objects (platforms, prototyping workshops, immersive systems...) on learning, creativity and innovation processes.
Team 2 "Engineering and Digital Tools" mainly concerns Digital Sciences and Engineering. The main scientific objectives focus on modeling, simulation, optimization and data analysis of cyber physical systems. Research work also focuses on decision support tools and on the study of human-system interactions in particular through digital twins coupled with virtual or augmented environments.
These two teams develop and cross their research in application areas such as
Industry 5.0,
Construction 4.0 and Sustainable City,
Digital Services.
Areas supported by research platforms, mainly that in Rouen dedicated to Factory 5.0 and those in Nanterre dedicated to Factory 5.0 and Construction 4.0.
The University of Agder (UiA), Faculty of Engineering and Science, hosts research in engineering, digital technologies, robotics, mechatronics and sustainable industrial systems. Its Department of Engineering Sciences develops industrial automation, cyber-physical systems, digital twins and battery recycling research, supported by experimental laboratories and national and European collaborations.
Job requirements
Skills
Scientific and technical skills: Operations Research; Simulation and Optimization; EV Battery Systems and Lifecycle Management; Explainable AI (XAI) and Data-Driven Modeling.
Soft skills: Interdisciplinary Communication; Collaborative Research; Teamwork; Independent and Goal-Oriented Work.
To convince you a little more:
36-month fixed-term contract
6 weeks of paid holiday (pro-rated based on time worked)
14 days of RTT (pro-rated based on time worked)
Meal vouchers
Company health insurance
Profit-sharing/incentive bonus
Teleworking
Laptop
If this profile suits you and you share CESI's values.
Don’t hesitate any longer and apply with us!
or
All done!
Your application has been successfully submitted!
You've already applied for this job
Thank you for your interest - we've already received your application, so this new submission can't be accepted. Your previous application is on file.

